Sunday, March 31, 2013

Rainbow Beauty - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Lady Mishka
I bought this tube about a year ago when she was selling at SATC
She left but has returned with more awesome tubes
You must obtain a license to use this art at SATC HERE
PTU Scrap Kit by Wicked Princess called "Cupcake Rainbow"
You an purchase this awesome kit at Designer Scraps HERE
Template by TallChic D-Zines HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright,wordart & back
 
Click oval back selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
add noise
 
Click on oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on long rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original
 
Click on square 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on frame back 1&2 selections,select all, float,defloat
add close-up of tubes you are using
selection invert delete
select none delete the original
apply Xero Radiance
 
Click on frame 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
add noise
 
Place your main tube in center of tag
applyd Xero Radiance again
 
Now time to add our elements
I used the following:
Butterfly 1&2
Cakepop
Candy 1&2
Cupcake 2,3,4&10
Flower 1
Gumdrop
Heart Frame
Mum
Rose 1&2
Sucker 3

Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 31,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Jensen SteamPunk - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
You can purchase her tubes at her store HERE
PTU Scrap Kit by Mizteeque from  called "SteamPunk"
You an purchase this awesome kit HERE
Template #30 by TwyztedT's Playroom HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 83%
Canvas size 700x700
Delete copyright, copy of raster 6&8, raster 11
 
Click on raster 5 & copy of rater 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on raster 3 & copy of raster 3 selections,select all, float,defloat
add close up of tube you are using
selection invert delete
select none delete the original
apply Xero Radiance with setting of choice
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Add noise to raster 7
 
Add your tube to center of tag
apply Xero Radiance with setting of choice
 
Now add any other elements of choice
I used the following:
Element 5
Element 9
Element 12
Element 13
Element 16
Element 22
Element 24
Element 25
Element 27
Element 29
Element 35
Element 36
 
Merge your layers
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 31,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Saturday, March 30, 2013

Carrot Easter - Exclusive kit for CC Forum

 
This tutorial is exclusive to The Creative Chick Forum
Kit used is an exclusive to our forum only by Chacha
TY Sweets for sharing your talent!!!Photobucket

Thursday, March 28, 2013

Jellybean Junction - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
FTU Scrap Kit by Jen from Sweet Temptations called "Jellybean Junction"
You can download this adorable kit HERE
Template #185 by Beckys Creations HERE
Mask by Jus Graphix - first mask in group HERE
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x640
delete copyright, all stars & shadow layers
 
Click on fat rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on fat rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on skinny rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on skinny rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on circle 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Now time to add our elements
I used the following:
Boat Chick
Boat Ride
Bunny 1
Cart Chick
Chick
Fence
Grass
House
Pot
Train 1
Tree 1
Trike Duck
Welcome Sign
 
Merge your layers
Open paper 4 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 28,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Wednesday, March 27, 2013

Pretty as Cherry Blossom - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Alex Prihodko
You can purchase this tube at Pics for Design HERE
FTU Exclusive Scrap Kit by Lexi - You need to like her to download kit HERE
Template #57 by Millie HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
PhotoEffex Scanlines
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete the copyright,wordart,layers 5&9
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Add noise to raster 7
 
Click on raster 8 selections,select all, float,defloat
paste close-up of tube
selection invert delete
apply Xero Radiance with settings of choice
apply PhotoEffex Scanlines
 
Place your main tube
Xero radiance with settings of choice
 
Add any elements from the kit
I used:
Element 1
Element 5
Element 9
Element 14
Element 16
Element 17
Element 18
Element 27
Element 29
Element 35
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Easter Time - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has closed
You can purchase his tubes at his store HERE
FTU Scrap Kit by Xtenziv called "Easter Naturally" HERE
Template #13 from Marilyn's Creationz HERE
Wordart from The Okie Toothfairy HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Eyecandy for wordart
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 80%
Canvas size 700x700
Delete copyright
 
Add glitter to the 2 frames
 
Click on rectangle pink selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on circle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on shape 1&3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on shape 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on rectangle pink selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Open wordart of choice & resize
Add Eyecandy Gradient Glow
 
Place your main tube
apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Balloon 2
Bow 3
Easterbug
Butterfly 1&2
Easter Button 2&3
Cupcake
Eggs 1,2&3
Flower 2,3,4,6&8
Tag 1
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Sunday, March 24, 2013

Sweet Easter Toon - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
You can find his art at CDO HERE
PTU Scrap Kit by Jen from Sweet Temptations called "A Sweet Easter"
You an purchase this awesome kit HERE
Easter Template #1 by Flaminsal HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Porcelin
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
delete copyright
 
Click on yellow circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on wordart selections,select all, float,defloat
add new layer & flood fill with light pink
select none delete the original
 
Click on blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on the green rectangles selections,select all, float,defloat
add 2 colors of choice on new layer
select none delete the original
add texture of choice
 
Click on pink oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on flower selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Place your main tube
apply Xero Porcelin with settings fo choice
 
Now time to add our elements
I used the following:
Bear 3
BFly 1
Bunny 2&3
Chick
Cupcake 3
Egg Chicks
Egg
Flowers 1,5&6
Sign
Tulips
 
Merge your layers
Open paper 6 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 24, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

What A Girl Wants - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
You can purchase these tubes at their store  HERE
PTU Scrap Kit by Jen from Sweets Temptations called "What A Girl Wants"
You an purchase this awesome kit  HERE
Template #191 by Kristin from Toxic Desirez  HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 90% all layers
Canvas size 700x700
delete copyright & copy of raster 8 layer
 
Click on raster 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on copy of raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on copy of raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on raster 5 & copy of raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
add new layer - open paper 9 and paste into selections
select none delete the original
 
Place your main tube
Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Cake
Cushion
Flower 2
Hearts
Ipod
Lipstick
Lock
Lollipop
LoveLetter
MP3
Nailpolish
Shoe
Unicorn
 
Merge your layers
Open paper 2 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 24,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Heavenly Peace - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
Which you must obtain a license to use at Pic for Design HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Heavenly"
You an purchase this awesome kit HERE
Template #93 by Kimberly from Bookworm Dezines HERE
Template downloads are on the left side of blog
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright
 
Click on left black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on right black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on white square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on purple oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on other black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on black square selections,select all, float,defloat
open paper 3 & paste into selection
select none
 
Click on frame selections,select all, float,defloat
paste a paper of choice from the kit - I used glitter 4
selection invert delete
select none delete the original
add noise of choice
 
Open frame 1 and place to left of tag
Dupliace then mirror
place closeup of tube you are using inside the frame
apply Xero Radiance with settings of choice
see my tag for example
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Butterfly
Bird1
Bling
Cloud
Flower
Harp
Heart
Sheer
Tag 2
 
Merge your layers
Open paper of choice and apply any mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 24, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Saturday, March 23, 2013

Hunnie Bunnie - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has closed
You must obtain a license to use this art at Elias's store HERE
FTU Scrap Kit by Mary from Sweet as Honey Creationz called "Rainbowlicious Easter" HERE
Easter Template by Samantha from Aussie Angel Creations HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Weave Effect from PSP
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright & rabbit layers
 
Click on thin line 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on top rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on glitter layer selections,select all, float, defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on small circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Add close-up of tube inside the circle
apply Xero Radiance with default settings
 
Click on all frame layers selections,select all, float,defloat
open frame 4 and paste into selections
select none & add noise of choice
 
Click on small rectangle top selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Add close-up of tube inside rectangle
apply Xero Radiance with default settings
 
Click on small rectangle bottom selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Place your main tube
Add Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bunny 1&3
Bunny Wreath
Butterfly 1,2&3
Clouds
Cupcake
Ducky
Easter Balloons
Easter Egg 1&2
Easter Sign
Eggs & Tulips
Frame 5
Rainbow
Sparkles 1,2&3
Swirls
Wreath
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 23,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Friday, March 22, 2013

My Sweetness - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase these tubes at his own store HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Sweet and Tender"
You an purchase this awesome kit from SATC HERE
My Sweetness Template by Flaminsal from Fired By Flamin HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
PhotoEffex Scanlines
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright & wordart shadow
 
Click on grey circle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on red rectangle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on grey square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Add close-up tube in the squares
apply Xero Radiance with settings of choice
 
Add noise to the frames with settings of choice
 
On the wordart I added a gradient
apply Photoeffex Scanlines
apply border with darker color
 
Place your main tube
Xero Radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Butterfly 1&3
Candy 1,3&4
Card 2
Champs
Flower 1
Gifts
Ribbon 2
Sparkles 1
Tag
 
Merge your layers
Apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Thursday, March 21, 2013

Fluffy Easter Bunny - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Danny Lee
You must obtain a license to use her art at SATC HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Coralie"
You an purchase this awesome kit at SATC HERE
Template #380 by Missy Kandi from Divine Intentionz HERE
Mask #22 by Gems Taggin Scraps HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright,all wordart & all shadow layers
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper37
selection invert delete
select none delete the original
 
Click on oval layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper36
selection invert delete
select none delete the original
 
Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper39
selection invert delete
select none delete the original
 
Click on square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper35
selection invert delete
select none delete the original
 
Click on square 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper24
selection invert delete
select none delete the original
 
On the framebacks I added blinds effect
add close up of tube you are using
apply Xero Radiance with settings of choice
 
Add noise to the frames
 
Place your main tube
Apply Xero Radiance again
 
Now time to add our elements
I used the following:
Element 4
Element 5
Element 6
Element 7
Element 8
Element 11
Element 12
Element 22
Element 23
Element 35
Element 40
Element 41
Element 48
 
Merge your layers
Open paper 38 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 21,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Wednesday, March 20, 2013

Please Don't Stop the Music - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
You must obtain a license to use this art at PFD HERE
PTU Scrap Kit by Lexi Creationz Scrapz called "Punk'd"
You an purchase this awesome kit at Designer Scraps HERE
Template #130 by Rachel from Scraps of Enchantment HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright & stars
 
Add noise to the 2 white circles
 
Click left & right pink circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on blk circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on large black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add noise
 
Click on large pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
On all the small backgrounds I added a face tube
On the frames I added a gradient with noise
 
Place your main tube in center of tag
Add Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 1
Element 2
Element 3
Element 4
Element 10
Element 12
Element 13
Element 18
Element 23
Element 24
Element 37
Element 42
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 20,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Jacklyn Love - Exclusive FTU

 
This tutorial is an exclusive to the CC forum
Frame used can be found at our blog HERE
We have alot of fun things to do at our forum so why not join us
You can find the link to the right
Photobucket

Tuesday, March 19, 2013

Special Gift - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Roman Zaric
You can purchase his tubes at his store HERE
PTU Scrap Kit by Mizteeque from  called "Dark Passion"
You an purchase this awesome kit HERE
Template #80 by Tami from Addictive Pleasures HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Xero Fritillary
Toadies Band Suppressing Noise
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 85% all layers
Canvas size 700x700
Delete copyright & 2 heart layers on each side
 
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Change overlay of text to soft light
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on special wordart selections,select all, float,defloat
add new layer & flood fill with gradient
apply Xero Fritillary with settings of choice
select none delete the original
 
Click on gift wordart selections,select all, float,defloat
add new layer & flood fill with solid color
apply Toadies Band Suppressing Noise with settings of choice
select none delete the original
 
Click on I'm your gift wordart
use the Hue & Saturation effect to colorize your wordart
 
Place tube of choice
apply Xero Raiance with settings of choice
 
Now add any other elements of choice
I used the following:
Element 2
Element 11
Element 15
Element 32
Element 40
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 19,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Bring on the Spring - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
Which you must obtain a license to use at CDO HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Spring Dreams"
You an purchase this awesome kit HERE
Template #212 by Millie HERE
Mask #017 by Vix - it is one of the big masks HERE
Don't forget to leave a thank you when downloading
 
Plugins Used
Mura Meister Clouds
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on layer 7 selections,select all, float,defloat
apply Mura Meister Clouds with settings of choice
 
On the wordart I added noise and merged together
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Butterfly 1&2
Fence
Flowers 1,2,3&4
Flower 10
Frame 3
Grass 1&2
Rabbit
Rainbow
Tree
 
Merge your layers
Open paper 7 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 19, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Monday, March 18, 2013

Dreaming of You - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
This tube was purchased at PTE which has closed
You can purchase his tubes at Garv - Girls PSP HERE
FTU Scrap Kit by Kittz from Kittz Kreationz "Dreaming of You" HERE
Template #222 by Millie HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Tramages Mo-Jellyfish
PhotEffex Scanlines
Penta Dot & Cross
Filters Unlimited Fine Canvas
Eyecandy for wordart
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright,layers 9&10
I added borders around some of my layers for the effect
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
add new layer - open paper 2 - paste into selections
select none delete the original
 
Click on layers 3&4 selections,select all, float,defloat
add new layer and flood fill with gradient of choice
apply Tramages MoJellyfish with settings of choice
apply Penta Dot & Cross with settings of choice
select none delete the original
 
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
add noise with settings of choice
 
Click on layers 6&7 selections,select all, float,defloat
add new layer and flood fill with solid color of choice
apply filters unlimited fine canvas
add close up of tube you are using inside circle
apply Xero Radiance with settings of choice
select none delete the original
 
Click on Dreaming wordart selections,select all, float,defloat
add new layer and flood fill with gradient of choice
apply PhotpEffex Scanlines
apply Eyecandy gradient with a brown color
select none delete the original
 
Click on OF You wordart
apply Eyecandy gradient with a peach color
 
Place your main tube
apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Element 6
Element 12
Element 13
Element 16
Element 20
Element 28
Element 36
Element 39
Element 40
Bottle Sampler
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 18,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Sunday, March 17, 2013

Bunny Meadow - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
You must obtain a license to use these tubes at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Bunny Meadows"
You an purchase this awesome kit at SATC HERE
Wordart HERE
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 86 & place as a new layer
Place your main tube to left of frame
Add Xero Radiance
Grab the freehand tool and draw aound the frame
Open paper 23 and place as a new layer
selections invert delete
move paper under frame
Open element 88 and place under frame
Move to the left  - duplicate amd mirror
arrange this how you want it to look then merge the two together
duplicate and flip - arrange on the bottom
Open the Happy Easter wordart & resize
place in center of frame
change overlay to soft light & dropshadow
duplicate several times till frame is full
 
Now lets add our elements around the tube
I used:
Element 21
Element 23
Element 30
Element 31
Element 46
Element 59
Element 74
Element 87
Element 93
Element 94
Element 105
Element 107
Element 108
 
Merge layers and apply mask If desired
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 17,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Happy Easter - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
This tube was purchased at PTE which has closed
You can find his art HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Eggsposed"
You an purchase this awesome kit HERE
Easter Template #4 by Flaminsal HERE
Mask #157 by Vaybs HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
delete copyright,wordart & small flower
 
Click on green rectangle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on large yellow square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on pink oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on green square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on yellow frame selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add noise with settings of choice
 
Click on large flower selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Place your main tube to left of tag
apply Xero Radiance with settings fo choice
 
Now time to add our elements
I used the following:
Balloons
Basket
Bow 1
Duck
Flower 5
Happy Easter
Hippity Hop Sign
Racing Duck
Train
 
Merge your layers
Open paper 1 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 17, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Friday, March 15, 2013

Daydreamer - PTU

 
Tube of choice: Im using the wonderful art work of Keith Garvey
This tube was purchased at MPT which has closed
You can find his art HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Daydreamer"
You an purchase this awesome kit HERE
Template #40 by Rose HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Penta Color Dot
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 115 all layers
Canvas size 650x650
delete copyright & layer 3
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on raster5
Effects/textures/blinds with settings of choice
 
Click on wordart selections,select all, float,defloat
add a new layer and flood fill with a gradientof choice
select none delete the original
apply Penta color dot with settings of choice
 
Place your main tube on top of wordart
 
Now time to add our elements
I used the following:
Boombox
Bow 1
Brad 1
Dfly 1
Journal
Paperclip 1,2&3
Skateboard
Teddy
 
Merge your layers
Open paper 10 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 15, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Monochrome Beauty - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jennifer Janesko
This tube was purchased at CIM which has now closed
You can purchase her tubes now at CDO HERE
FTU Scrap Kit by Mizteeque from  called "Monochrome"
You can download this awesome kit HERE
FTU cluster by Callie that matches this kit HERE
Look under Monochrome frames
Mask of choice
 
Plugins Used:
Xero Radiance
Xero Porcelin
PhotoEffex Scanlines

Ok Lets get Started:
Open cluster frame - shift D and close original
Canvas size 700x700
Open closeup tube and place inside the frame
Erase all the diamonds inside the frame
Apply Xero Porcelin with default settings
Apply PhotoEffex with default settings

Place main tube to right of frame
Apply Xero Radiance with settings of choice
I always place my tube then build around it
 
I used the following elements:
Element 1
Element 8
Element 13
Element 18
Element 20
Element 21
Element 29
Element 34
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 15,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Sunday, March 10, 2013

Serenity Rain - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You must obtain a license to use his art at his store HERE
PTU Scrapkit by Nicky from Inzpired Creationz called "Spring Serenity"
You can purchase this kit HERE
FTU Cluster frame by Julies Jazz Designz HERE

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
This is a very quick and easy tutroial
Open frame - Shift D to duplicate - close original
Canvas 700x700
Grab the magic wand and click inside frame
Selections modify expand by 10
Open paper 1 from kit and paste as new layer
Selections invert delete
Move paper under frame
Place close up of tube inside frame
Apply Xero Radiance with settings of choice

Add any other elements you want from the kit
I used:
Butterfly
Clouds
Rain
Sparkles 2
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 10,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Thursday, March 7, 2013

Let the Sun Shine - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jose Cano
I bought this tube at MPT which has now closed
You can purchase all his tubes now at HERE
FTU Cluster frame by Crystal which can be found on out blog under Breezy Day kits HERE
FTU kit by Renaee which matches this frame HERE
Mask of choice
Please leave some love when you download this mask..A little thanks goes a long way
 
Plugins Used:
Xero Fritillary
 
Ok Lets get Started:
Open cluster frame - shift D and close original
canvas size 700x700
grab the freehand tool and go around the frame
open paper 7 from kit - paste as new layer - selections invert delete
Place your main tube inside frame
Apply Xero Radiance with settings of choice
Duplicate tube again and move to the top
Erase any parts hanging out from bottom
 
Now add any elements of choice from kit
I used the following:
Bird 2
Bow 4
Butterfly 1&2
Flower 3
Flower 5
Sparkle
 
Merge your layers
Add paper of choice and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 4,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Happy Paddy Day - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at PTE which has closed
You can purchase his tubes now at his store HERE
FTU kit by Jen from Sweet Temptations called "Shamrocks" HERE
Look to the right under free kits
Cluster frame by Bev that matches this kit under St Patricks HERE
Mask of choice
Please leave some love when you download..A little thanks goes a long way
 
Plugins:
Xero Radiance
PhotoEffex Scanlines
 
This is a very simple and easy tut
Ok Lets get Started:
Open blank canvas 700x700
Open frame & place as a new layer
Grab the magic wand & click inside the frame
Selection modify expand by 10
add new layer and flood fill with color of choice
Selections invert delete
Open the closeup of tube and place in several different areas of frames
Apply Radiance with setting of choice
Change blend mode to overlay
Apply PhotoEffext with setting of choice
Place your main tube in center of frame
Apply Xero Porcelin
I moved the wordart to the bottom of my frame

Merge your layers
Open paper of choice
Apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 25,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket

Closeup - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Skyscrap Pinup
You can purchase this tube at SATC HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Floraemo"
You an purchase this awesome kit from SATC HERE
Template #17 by Flaminsal HERE
Mask by Janice - 3rd mask HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Tramages Starmaker
Xero Fritillary
Eyecandy Gradient Glow
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright
 
I added a borders to my circle,rectangle,star & frames
 
Click on small circle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on large circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on left white rectangle selections,select all, float,defloat
paste closeup of tube you are using
selection invert delete
select none delete the original
Apply Xero Radiance with settings of choice
 
Click on right white rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on frames 1&2 selections,select all, float,defloat
add new layer and flood fill with a gradient of choice
Apply Tramages Starmaker with default settings
Apply Xero Fritillary with settings of choice
selection invert delete
select none delete the original
 
Click on star selections,select all, float,defloat
add a new layer & flood fill with color of choice
select none delete the original
add noise
 
Click on wordart selections,select all, float,defloat
add a new layer & flood fill with gradient of choice
select none delete the original
Apply Eyecandy Gradient Glow
 
Place your main tube
Xero Radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Candy1
Cuff
Frame 2
Halftone 1&3
Lipstick
Nail Polish
Skull 3
Sparkles
 
Merge your layers
Add paper of choice & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 7,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidentalPhotobucket