Sweet Watermelon - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has now closed
You can purchase his tubes at his store HERE
PTU Scrap Kit by Mizteeque from  called "Sweet Watermelon"
You an purchase this awesome kit HERE
Mask of choice   Plugins Used:
Xero Radiance
Ok Lets get Started:
Open blank 700x700 image
Open paper 15 and apply mask of choice
Open 28 and resize
Place tube of choice in middle of frame
I always build around my tube   I used the following elements:
Element 1
Element 2
Element 6
Element 9
Element 15
Element 16
Element 19
Element 26
Element 27
Element 31
Element 33
Element 38
Element 45   Merge your layers   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 26,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Luck of the Irish - FTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Tony Tzanoukakis
You can purchase his work at his store HERE
FTU Scrap Kit by Mary HERE
St Patrick Template #1 by Tika HERE
Mask of choice
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance
Penta Color Dot   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 90%
Canvas size 715x715
Deleted copyright   Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original   Click on copy of raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on copy of raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on raster 2 selections,select all, float,defloat
add a new layer and flood fill with gradient of choice
apply Penta Color Dot
select none delete the original   Place your main tube
Xero Radiance with settings of choice   Now time to add our elements
I used the following:
Cloverbeads
Flowers
Horseshoe
Rainbow
St Paddy Goodies 1&2
St Paddys Tag   Merge your layers
Apply mask of choice   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 25,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Happy St. Paddys Day - FTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at PTE was has now closed
You can now purchase his work at his store HERE
FTU Scrap Kit by Melissa HERE
Template #201 by Millie HERE
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance
Penta Drag
PhotEffex Scanlines   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Deleted copyright & layers 9&10   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original   Click on layer 4&5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original   Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original   Click on layer 8 selections,select all, float,defloat
add new layer and flood fill with gradient
apply Penta drag with default settings
apply PhotoEffex Scanlines with default settings
select none delete the original   Click on the wordart selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add noise with settings of choice
I also added a black background   Place your main tube to left of tag
Xero Radiance with settings of choice   Now time to add our elements
I used the following:
Element 1
Element 5
Element 9
Element 13
Element 20
Element 23
Element 28
Element 30   Merge your layers   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 21,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Love Like Mine - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Alex Prihodko
Which you must obtain a license to use at Pic for Design HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Love Like Mine"
You an purchase this awesome kit HERE
Template #452 by Missy HERE Mask of choice
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x685
delete copyright,wordart & all samll circles   Click on squares 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original   Click on left & right circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original   Click on squares 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original   Click on oval shape selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on the 2 circle backs and add noise with settings of choice   Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original   Click on medium circles left & right selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on the 2 circle lines and add noise with settings of choice   Place your main tube
Xero Radiance with settings of choice   Now time to add our elements
I used the following:
Basket
Cupcake
Drink
Gift 1
Gumball Machine
Wreath   Merge your layers Add mask of choice   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 25, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Love You - FTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
Which you must obtain a license to use at her store HERE
FTU Cluster frame by Mary from Sweet As Honey Creationz  HERE
FTU kit by mary to match the cluster HERE
Mask of choice
Please leave some love when you download ...A little thanks goes a long way   Plugins Used:
Xero Radiance   Ok Lets get Started:
Open cluster frame - shift D and close original
Resize cluster 92% all layers
canvas size 700x700
grab the freehand tool and go around the frame
open paper 6 from kit - paste as new layer under frame
selections invert delete   Place your main tube where you desire
Apply Xero Radiance with settings of choice   Now add any elements of choice from kit
I used the following:
Decor 1
Heart Butterfly 1
Valentine 1
Sparkles 3 - I duplicated several times   Merge your layers
Open paper 1 from kit and place as a new layer
Open mask and apply to tag   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 17,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Cool Biker - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zlata_M
I got this tube after completing a quest
You must obtain a license to use this art at Pics for Designs HERE
PTU Scrapkit by Nicky from Inzpired Creationz called "Biker Babe"
You can purchase this kit HERE   Plugins Used:
Xero Radiance   Ok Lets get Started:
This is a very quick and easy tutroial
Open frame 6 from kit & place as a new layer
Grab the magic wand and click inside frame
Selections modify expand by 6
Open paper 1 from kit and paste as new layer
Selections invert delete
Move paper under frame
Place close up of tube inside frame to the left
Apply Xero Radiance with settings of choice
Change blend mode to Luminance(L)
Place main tube to right of tag Apply Radiance with settings of choice
Add any other elements yo want from the kit
I used:
Bottle 1&2
Charm 1
Ciggy Pack
Cocktail 2
Cross 2
Halftone 2
Heart 5
Motorcycle 1
Skull 2
Square Tag   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 13,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Rock Hard - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
You must obtain a license to use her art HERE
PTU Scrapkit by Nicky from Inzpired Creationz called "Rock Hard"
You can purchase this kit HERE
FTU Cluster frame by Christene from PSPers Delite HERE
Plugins Used:
Xero Radiance   Ok Lets get Started:
This is a very quick and easy tutroial
Open frame - Shift D to duplicate - close original
Grab the magic wand and click inside frame
Place tube inside frame
Open frame 1 from kit and place under the original frame
Add any other elements you want from the kit
I used:
Bow
Halftone 2
Sign
Splatter   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 12,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 

Spin Around My Finger - FTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zlata_M
Which you must obtain a license to use at Pics for Design HERE
FTU Scrap Kit by Kristen which you can download HERE
Template #184 by Millie HERE
Mask by Vesta HERE
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
delete copyright   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original   Click on layers 5&7 selections,select all, float,defloat
add new layer and flood fill with black
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original   Leave layers 8,9,14 & 15 as is
On layers 10 & 12 add noise with settings of choice   Click on layers 11&13 selections,select all, float,defloat
add new layer and flood fill with gradient of choice
select none delete the original
Add closeup of tube in the right circle
Apply Xero Radiance
Change blend mode to screen   Place your main tube
Xero Radiance with settings of choice   Now time to add our elements:
Bomb
Bottle
Butterfly
Candy
Cupcake
Filmstrip
Kitty
Skull 1
Sparkles
Speakers
Splatter   Merge your layers
Add mask   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 12,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

A Dirty Mind - FTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase his tubes at Garv - Girls PSP HERE
FTU Scrap Kit by Tasha from Tasha's Playground called "Wild Thing" HERE
Template #169 from Amy & Leah HERE
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance
Tramages Pool Shadow
PhotEffex Scanlines
Eyecandy for wordart   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 116%
Canvas size 700x700
Delete copyright   Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on layer 5 selections,select all, float,defloat
Apply Tramages Pool Shadow with default settings
Add close up of tube you are using inside heart
selection invert delete
select none delete the original
Apply Xero Radiance with settings of choice
Apply PhotoEffex with default settings   I then added a border around the heart with noise   Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original   Add dropshadow to the wordart & noise to the first wordart   Place your main tube
apply Xero radiance with settings of choice   Now add any other elements of choice
I used the following:
Brad
Confetti
Heart
Pillow
Splatter
Wordart   Merge your layers   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 7,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

January Chill - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Roman Zaric
You can purchase his tubes at his store HERE
PTU Scrap Kit by Mizteeque from  called "January Chill"
You an purchase this awesome kit HERE
Template #7 by Mary from Sweet as Honey Creationz HERE
Don't forget to leave a thank you when downloading   Plugins Used:
Xero Radiance
PhotoEffex Scanlines   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 94% all layers
Canvas size 700x700
Delete copyright & heart layer   Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original   Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original   Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original   Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original   Add tube inside the circle
Apply Xero Radiance with settings of choice
Apply PhoEffex Scanlines with default settings
Change blend to overlay   Place tube of choice where desired
Repeat the Radiance settings   Now add any other elements of choice
I used the following:
Element 2
Element 3
Element 7
Element 9
Element 12
Element 19
Element 21
Element 31
Element 41
Element 42
Element 51
Element 53   Merge your layers   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 7,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Sweet Valentine Pinup - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
You must obtain a license to use this art at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Chocolate Mint Valentine"
You an purchase this awesome kit at SATC HERE
Template #170 by Millie HERE
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance
Xero Porcelin   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright & wordart   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper29
selection invert delete
select none delete the original   Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper24
selection invert delete
select none delete the original   Click on layers 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original   Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper27
selection invert delete
select none delete the original   Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper35
selection invert delete
select none delete the original   Click on layer 9 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original   Place your main tube
Add Xero Radiance
Add Xero Porcelin   Now time to add our elements
I used the following:
Element 1
Element 4
Element 18
Element 28
Element 30
Element 37
Element 41
Element 48
Element 51
Element 53
Element 54
Element 56
Element 57   Merge your layers   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 7,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Be Mine - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Markia
You must obtain a license to use these tubes at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Good and Plenty"
You an purchase this awesome kit at SATC HERE
Mask of choice   Plugins Used:
Xero Radiance   Ok Lets get Started:
Open blank canvas 700x700
Open element 91 & place as a new layer
Place your main tube to left of frame
Add Xero Radiance
Grab the freehand tool and draw a circle around the frame
Open paper 25 and place as a new layer
selections invert delete
move paper under frame
Place close up of tube in the frame
Apply Xero Radiance again
Now lets add our elements around the tube
I used:
Element 65
Element 70
Element 78
Element 85
Element 98
Element 111
Element 116
Element 124   Merge layers and apply mask of choice   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 5,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Sonet in Lavender - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jose A Cano
You can purchase his tubes at SATC HERE
PTU Scrap Kit by Mizteeque  called "Loving Lavender"
You an purchase this awesome kit HERE Template #2 by Mary from Sweet as Honey Creationz HERE
Mask of choice
Don't forget to leave a thank you when downloading   Plugins Used:
Xero Radiance
Xero Porcelin   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 94% all layers
Canvas size 700x700
Delete copyright   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Click on other layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used element 67
selection invert delete
select none delete the original   Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original   Add tube inside the circle
Apply Xero Porcelain with settings of choice
Apply Xero Radiance with settings of choice   Place tube of choice where desired
Repeat the Porcelin & Radiance settings   Now add any other elements of choice
I used the following:
Element 16
Element 19
Element 23
Element 24
Element 45
Element 47
Element 51
Element 52
Element 57 Merge your layers
Add mask of choice   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 5,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

For Your Love - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Amy Matthews
You can purchase this tube at CDO HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Hard Core Valentine"
You an purchase this awesome kit from SATC HERE
Template #189 by Millie HERE
Don't forget to leave a thank you when downloading   Plugins Used:
Xero Radiance
Eyecandy Gradient Glow   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright   I added a border to my circles with noise   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original   Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original   Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original   Click on layers 8&9 selections,select all, float,defloat
add a new layer & flood fill with white
select none delete the original
add noise   I moved the wordart up a little then added Eyecandy Gradient Glow   Place your main tube
Xero radiance with settings of choice   Now add any other elements of choice
I used the following:
Brad
Candy 1
Cocktail
Collar 2
Condom
Cuffs
Cupcake 2
Glass
Halftone 1
Hearts
Sex Toy 5
Sex Toy Dice
Shoe 2
Sparkles 2   Merge your layers   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 2,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Rebel - Exclusive at the CC

 

  This is an exclusive tutorial that can be found at our forum The Creative Chicks We would love to see you join us HERE

Caught Smoochin - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed: Tube of choice: Im using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use at his store HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Caught Smoochin"
You an purchase this awesome kit HERE
Template #1 by Peachy Keen Designs HERE
Mask 7 by Scrappin Krazy Designs HERE
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize by 115
Canvas size 700x700
delete copyright,flourishes & text   Click on square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original   Click on square frame selections,select all, float,defloat
add new layer & flood fill with color of choice
select none delete the original
add noise   Click on hearts selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original   Click on hearts frame selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
add noise again   Place your main tube
Xero Radiance with settings of choice   Now time to add our elements
I used the following:
Flower 9
Ribbon
WA 1&2   Merge your layers
Open paper 10 and apply mask   Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 2,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Nina - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Alexander McMillan
You must obtain a license to use this art at SATC HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Nina"
You an purchase this awesome kit at SATC HERE
The tube matches the kit!!!
Collab Template #4 from Scrap Rebellion HERE
Don't forget to leave a thank you when downloading
Plugins Used:
Xero Radiance   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright & layers 12-15   Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original   Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original   Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original   Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original   Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original   Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original   Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original   Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original   Click on layers 9&10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original   Add close up of tube you are using inside the circles
Add Xero Radiance with settings of choice   Click on layer 11 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original   Place your main tube
Add Xero Radiance again   Now time to add our elements
I used the following:
Element 33
Element 34
Element 35
Element 36
Element 51
Element 53
Element 74
Element 84
Element 92   Merge your layers   Place your name where you like it Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 2,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Sweet Love Bug - PTU

  This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase his tubes at Garv-Girls PSp Tubes HERE
PTU Scrap Kit by Mizteeque from  called "Love Bug"
You an purchase this awesome kit HERE
Excluisve Valentine Template by Christene which will be on the CC Blog soon
You can download the template from our forum HERE
Don't forget to leave a thank you when downloading   Plugins Used:
Xero Radiance   Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright   You will need to resize the elements to your choice
I didn't use any dropshadow on the template   Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original   Click on raster 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original   Click on raster 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original   Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original   Click on copy of raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original   Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original   Add tube you are using
Apply Xero Porcelain   Now add any other elements of choice
I used the following:
Element 2
Element 5
Element 11
Element 19
Element 20
Element 23
Element 26
Element 28
Element 36   Merge your layers Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 1,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental